If the GEN OFF light illuminates and cannot be reset, the operating generator N2 should be:

Enhance your knowledge with the Beechjet 400A Computer Training Systems Test. Study using detailed flashcards and multiple-choice questions. Each question offers insightful hints and explanations to ensure thorough preparation for your exam.

Multiple Choice

If the GEN OFF light illuminates and cannot be reset, the operating generator N2 should be:

Explanation:
When a GEN OFF light is on and cannot be reset, the generator that is still online must be able to carry the electrical load and maintain proper voltage regulation on its own. In the Beechjet 400A CTSys, the operating engine-driven generator needs to be turning enough to support the generator’s self-excitation and regulation circuitry. The minimum N2 required for the remaining generator to remain capable and to re-energize the bus, if needed, is about 58%. Below that, the generator can’t sustain proper output, while values like 60% or 62% are higher than the minimum required and aren’t the specified benchmark for the “minimum” condition. A full 50% would be too low to provide reliable generation.

When a GEN OFF light is on and cannot be reset, the generator that is still online must be able to carry the electrical load and maintain proper voltage regulation on its own. In the Beechjet 400A CTSys, the operating engine-driven generator needs to be turning enough to support the generator’s self-excitation and regulation circuitry. The minimum N2 required for the remaining generator to remain capable and to re-energize the bus, if needed, is about 58%. Below that, the generator can’t sustain proper output, while values like 60% or 62% are higher than the minimum required and aren’t the specified benchmark for the “minimum” condition. A full 50% would be too low to provide reliable generation.

More practice questions
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy